Car body repair and care BMW X5 E53

Restoration of anti-corrosion protection of the body
Restoration of the anti-corrosion protection of the body after repair must begin with the removal of the old PVC (PVC) anti-corrosion coating of the body,...

Car body wash
Timely and thorough car wash is the simplest and most effective car body care procedure. Here are some of the most common car washing tips: start washing the...

Paintwork care
Cleanly washed and dry paintwork should be regularly treated with special agents to protect the surface from the influence of weather influences with a layer...

Polishing of the paintwork
Polishing of the painted surface of the body is required only in cases where, as a result of insufficient care, the coating has lost its appearance due to road...

Removal of tar deposits
Removal of resinous deposits should not be carried out immediately, because. they eat into the paint, forming stains that cannot be completely removed. Fresh...

Cleaning the surface from insects
Cleaning of insects from the car should be carried out immediately after returning from a trip. Dead insect residues contain substances that can damage...

Care of plastic products
Caring for plastic products - individual parts, artificial leather seats, body roof upholstery, glass lamps and elements painted in matt black - is to wash...

Cleaning glass and rubber seals
Glass cleaning consists in wiping them outside and inside with clean soft chamois or rags. With severe pollution, alcohol, ammonia and warm water or special...

Wheel rim care
Light alloy wheel rims are treated with a rim cleaner, especially during the cold season. At the same time, it is forbidden to use aggressive liquids...

Seat belts and upholstery
Without removing the seat belts, wash with a weak solution of soapy alkali. To avoid damage to the fabric, do not use chemical cleaners. Winding automatic...

Anti-corrosion protection of the underbody and engine compartment
Anti-corrosion protection of the underbody Anti-corrosion protection of the bottom of the body is carried out at the factory or at specialized service...

Body restoration — general information
Restoration of the body is carried out immediately after a defect is detected. The body is the most vulnerable in terms of corrosion and performance. According...

Restoration of areas affected by corrosion
Restoration of areas affected by corrosion should be carried out immediately upon detection of its traces on the paintwork or in places where the mastic has...

Restoration of the paintwork
Restoration of the paintwork is inevitable during the operation of any car, because. the oldest of them is now about 5 years old, the production of the car...

Puttying the surface of the body
Puttying is used during repair and restoration work. These works are preceded by the restoration of the geometric surface of the repaired body panel. Many...

Body surface painting
The panel surface must be painted in a dry, clean and pre-ventilated area. The air in the room must be dry, clean and still. Dust is nailed down by wet...

Anti-corrosion body protection
Anti-corrosion protection of the body is an integral part of extending the life of the car. During the operation of the car, there is a need to restore the...

Elimination of small surface defects
The resulting deformations of the outer surfaces associated with their minor damage are eliminated by two main methods - punching and straightening, followed...