![](https://www.bmwman.ru/img/ser7/2370.jpg)
For vehicles with adjustable wiper pressure, with the ignition off and the wiper blade installed, the gap between the adjusting screw (1) and pusher (2) should be 0 – 0.2 mm (A).
![](https://www.bmwman.ru/img/ser7/2371.jpg)
1. Mount special tool no. 00 9 230 on the glass near the pivot point of the wiper blade.
![](https://www.bmwman.ru/img/ser7/2372.jpg)
2. If the installation angle is not adjusted correctly, turn the wiper arm to the correct position using two tools No. 00 9 220. The procedure is carried out in the following order:
- Choose as far as possible (A) from fixture (1) before adaptation (2) and fix the device (1) so that the hinge (3) did not experience bending loads;
- crank fixture (2);
- Check functionality.