Withdrawal
Open back door.
Use a small screwdriver to press the upper rear door light out of the recess, disconnect the plug connector and remove the light.
Release the left and right swivel clamps on the tool box and open the tool box.
Remove the cover for the rear door replacement bolt and slide it through the trim.
Release the left and right clamps of the tool box, unscrew the box from the receivers and remove.
Loosen wiper shaft trim towards top.
Loosen 2 bolts -1 -.
Unfasten the rear door lock cover.
Partially detach left and right trim from window pane -1- and remove 9 screws -2-.
Unclip and remove cover carefully downwards.
Installation
Check tightness of rear door clips, if necessary replace defective clips.
When replacing the tailgate: Remove clips and soundproofing from the old trim and install on the new trim.
Attach cover and fasten.
Attention. Before installing the rear door trim, the trim must be fixed, so that the rear door trim is centered before being fixed.
Attach the rear door lock cover.
Install the wiper axle trim. Put the clips on the pad first.
Subsequent installation is carried out in reverse order.