Working principle of diesel engine In a diesel engine, fresh air is sucked into the cylinders where it is highly compressed. Due to this, the temperature in the cylinders rises above the...
Checking glow plugs Check condition: engine cold (ambient temperature), the battery is fully charged, battery voltage is at least 11.5 volts. Check the 80 amp strip fuse in the...
Self-diagnosis system and fault codes Diesel engine power system control unit (DDE) has a self-diagnostic system that stores power system failures in the form of codes. The preheating system is not...
High pressure fuel pump device 1 high pressure fuel pump 2 Toothed pulley 3 Key 4 Washer 5 Nut M12 6 Stop solenoid valve 7 O-ring 8 Spring washer 9 Nut 10 Front mounting nut M8 (2 pieces) 11...
Glow plugs with burned out rods Burnt out glow plug rods are often the result of malfunctioning injectors. These violations cannot be attributed to a defect in the glow plug. If such glow...
Removal of air from the power system After emptying the fuel tank or after replacing parts of the power system, as a rule, bleeding from the power system is not required, since air is bled...
Removal and installation of spray nozzles Defective injectors can cause severe knocking in the engine, the cause of which can be mistakenly attributed to the destruction of the bearings. With such...
Fuel filter heating device To ensure the fluidity of diesel fuel at low temperatures, it is heated. This is done by an electric fuel filter heater. Thanks to this, thickening of the fuel...