Cross section of a Getrag gearbox Cross section of Getrag type 262/9 4-speed gearbox Cross section of Getrag type 265/6 5-speed gearbox
Features of removing and installing the gearbox After removing the gearbox suspension mounts, place a stand under it and disconnect the suspension cross member from the floor of the body. Lower the box to...
Gearbox disassembly Slide sleeve 1 (see photo), knock out pin 2 and remove the gear change lever. Mount the gearbox on stand 23.0.160 and drain the oil from it. Remove the front...
Gearbox Assembly Install the parts on the secondary shaft in the following order: needle bearing 15 (see photo), 3rd gear gear 16, synchronizer ring 17, synchronizer sleeve 18,...