Gearbox «Getrag 262/8» car BMW 5 Series E12

Details of the gearbox housing of cars with 6-cylinder engines:
Details of the gearbox housing of cars with 6-cylinder engines: A - gearbox housing; B - back cover; 12 - cross member of the gearbox suspension.

Parts of gearbox shafts for cars with 6-cylinder engines
Details of gearbox shafts for cars with 6-cylinder engines: And — a primary shaft; B - secondary shaft; B - intermediate shaft.

Removal and installation of a transmission
Remove completely system of release of the fulfilled gases. Loosen the bolts securing the propeller shaft to the flange of the output shaft of the gearbox....

Gearbox disassembly
Install the gearbox on a stand for disassembly. Remove the front gearbox housing cover, which is integral with the clutch release bearing guide bushing. Using...

Gearbox Assembly
Check the degree of wear of the guide ribs of the shift forks, the width of which must be at least 6 mm. Check the degree of wear of the synchronizer blocking...

Determination of the thickness of the adjusting ring of the rear bearing of the secondary shaft
Measure the depth of the output shaft rear bearing seat in the cap (see photo) and in the rear cover of the gearbox housing. Add the results of measurements...