Attention: The throttle cable is sensitive to bending and therefore requires special care during installation. A single slight bend in the cable can cause it to break later. Therefore, cables with bends must not be installed.
Remove air filter (see section «Removal and installation of the air filter»).
Press the gas pedal all the way (full throttle position) and in this position fix it with a suitable board inserted between the pedal and the seat.
Loosen locknut -A-.
Press the throttle lever -1- to the full throttle position and unscrew the adjusting screw -5- until the throttle cable is tensioned.
Tighten locknut.
Install air filter (see section «Removal and installation of the air filter»).