Withdrawal
Disconnect the ground wire from the battery.
Remove bottom cover.
Attention: To remove the instrument panel, you can remove the steering wheel.
Loosen the cover nuts -1- from below, pull out the cover -2-.
Loosen the 6 screws of the bezel, pull out the bezel -1-.
Loosen the screws on both sides. Pull the instrument panel out of the dashboard. At the same time, turn the steering wheel so that the instrument panel can be pulled out.
Disconnect all connectors.
When pulling the combination socket out of the dashboard, first pull the latch -1- out of the combination socket.
Installation
Connect all connectors to the instrument panel. Secure the combo connector with the latch.
Insert the instrument panel into the dashboard and fasten with screws.
Insert the bezel and secure with 6 screws.
Insert cover plate and fasten with 2 screws.
Install the bottom trim in the footwell.
Connect ground wire to battery.
Check the electrical function of the instrument panel.